Size PN200, pressure rate PN10, wafer type, clamping between flanges according to EN1092-1, the valve is three eccentric type. The butterfly valve is used for high temperature with radiator design. The material body material stainless steel A351 CF8, disc material stainless steel A351 CF8, stem SS, disc sealing ring SS304+graphite laminated.
The safety valve is a safety protection valve. Its opening and closing parts are normally closed under the action of external force. When the pressure of the medium in the equipment or pipeline rises and exceeds the specified value, it will automatically open. It is prevented by discharging the medium to the outside of the system. The pressure of the medium in the pipeline or equipment exceeds the specified value.
As per below detail description for the soft seat butterfly valve :DN250 rate PN16 type wafer end, clamped between flanges, the flange standard GOST 33259, the valve is motorize electric actuator operated, material body material ductile iron, disc material stainless steel CF8, shaft material stainless steel. The actuator is 380V / 50Hz / 3ph, no explosion-proof option, open / close type, with integrated limit switches, integrated torque switches, with manual override, IP67, for -40degree C, with cable gland .
Size 6inch, pressure rate class 150, LUG type tapped holes, clamping between flanges according to ANSI B16.5 class 150, valve construct is triple offset type, the butterfly valve is with stainless steel steel: The material body material stainless steel A351 CF8M, disc material stainless steel A351 CF8M, stem material 17-4PH, disc sealing ring SS316+graphite laminated.
Ball valve floating ball type, 2 piece construct, full bore, DN50, PN16, flanged end, flange with raised face, valve material stainless steel: body and bonnet AISI321, ball and stem AISI321, seat PTFE, the ball valve is manual operated with handle lever. AISI321 is better than normal stainless steel such as AISI304, AISI321 include special chemical element “Ti” which is better for corrosive medium .
Ball valve, type trunnion mounted ball with upper stem supported, class rate 300Lb, lockable gearbox with handwheel operation, split body ( two piece ) construct, which is generally used for middle and low pressure condition construct. the valve is full bore type, which provide excellent flow rate. Flanged end raised face, flange finishing with serrated face. fire-safe design, with anti-static device spring supported stainless steel small ball, also is blow-out proof stem design. The ball valve is double block and bleed function design. and stem & seat grease injection fitting. With bleed plug and vent plug. Main part material body and bonnet ASTM A216 WCB, ball ASTM A182 F316, seat ASTM A182 F316, prime sealing NYLON, stem SS A276 316, seat spring Inconel X-750, packing graphite, bolt and nut ASTM A193 B7 & A194 2H.
Ball valve, trunnion mounted ball with supported, pressure rate class 600Lb, W/C lockable gearbox with handwheel operation, split body ( two piece ) construction , it is generally used for middle and low pressure condition construct. the valve is full bore, which provide excellent flow rate. The valve is flanged end raised face, flange finishing with serrated face. fire-safe design, with anti-static device spring supported stainless steel small ball, also is blow-out proof stem design. The ball valve is double block and bleed function design. and stem & seat grease injection fitting. With bleed plug and vent plug. Main part material body and bonnet ASTM A216 WCB, ball ASTM A182 F316, seat ASTM A182 F316, prime sealing NYLON, stem SS A276 316, seat spring Inconel X-750, packing graphite, bolt and nut ASTM A193 B7 & A194 2H.
Since the austenitic stainless steel material, and end user do not have special requirement about painting, we apply no painting to valve. And anti-rust coating shall be applied to valve bore, raise face ( serrated face ) and disc surface.
Detail description of finished butterfly valve refer to below :size DN600 rate PN16 double flange type, Triple Offset construction, valve is gearbox operated, material body material C.S. WCB, disc stainless steel carbon steel A216 WCB, stem material stainless steel F6a, seal stainless steel 304 + graphite, packing graphite, with bolting A193 B7&A194 2H, gland C.S. WCB.
The strength performance of the copper valve refers to the ability of the copper valve to withstand the pressure of the medium. The copper valve is a mechanical product that bears internal pressure, so it must have sufficient strength and rigidity to ensure long-term use without cracking or deformation.
1. Easy to install, only need to connect the hot and cold water pipes, it will automatically adjust the constant temperature water. 2. The temperature is adjustable, especially suitable for the elderly and children.
If the pneumatic ball valve is not closed tightly, the production will be obviously affected. Therefore, you need to pay special attention to these details during use. Then how do we solve the problem of the pneumatic ball valve not being tightly closed? The manufacturer will take you to understand it. The maximum flow volume of the electric cut-off ball valve: Due to its streamlined layman and full right-angle rotation control, the maximum volume is particularly high, the flow capacity is particularly large, and the flow resistance is small, so a smaller and more economical valve size can be used .
© 2021 Zhejiang Zhengfeng Valve Co., Ltd.
